Oil and gas separation filter
When the product oil flows in from the inlet, the solid impurities are removed through the filter net installed in the cylinder. When the liquid passes through the filter module, the flow direction of the liquid is changed, so that the free gas and partially dissolved gas of the oil variety fully run out, and the gas rises. To the top of the separator, a gas space forms and an oil and gas interface occurs. As the gas increases in pressure, the volume increases, the oil-gas interface decreases, when the float device moves to a certain degree, the gas valve is opened to eliminate the gas, the oil-gas interface rises, and the gas space is reduced. The float device closes the gas valve, so that the flow The medium of the air-removal filter achieves the purpose of separation of oil, gas and solid.
Oil and gas separation filter
1. The core part of the filter is the filter core. The filter core consists of a filter frame and a stainless steel wire mesh. The stainless steel wire mesh is suitable for damage and needs special protection.
2. When the filter is working for a period of time, a certain amount of impurities are precipitated in the filter core. At this time, the pressure drop increases, the flow rate will decrease, and the impurities in the filter core need to be promptly removed;
3. When cleaning impurities, special attention should be paid to the fact that the stainless steel wire mesh on the filter core cannot be deformed or damaged. Otherwise, the filter installed on the filter core will not meet the design requirements for the purity of the filtered medium. Compressors, pumps, instruments and other equipment will be affected. To damage;
4. If the stainless steel wire mesh is found to be deformed or damaged, it must be replaced immediately.
No.31011802002466
